Barricade tape

BusinessNo Comments

Barricade tape

Barricade tape is brightly colored tape (usually incorporating a -tone pattern of alternating yellow-black or red-white stripes or the words “Warning” or “Danger” in prominent lettering) that’s used to warn or be a focus for passersby of an area or scenario containing a potential hazard. It acts as a minor obstacle to prevent unintentional entrance to that area or state of affairs and as a result enhances normal safety. Barricade tape can also be known as construction tape or barrier tape or in reference to the safety hazard concerned as caution tape, warning tape, danger tape or hazard tape. When utilized by a police force, the tape is named police tape.

The tape is commonly wrapped and affixed as a visual warning sign and demarcation, as an example towards coming into a dangerous area, similar to an industrial or commercial building site, a roadworks building site or the scene of an accident[1] or against the law (for crime scene preservation), or in opposition to dealing with inoperative machinery or appliances.

Barricade tape is made with durable, resilient, tear-proof plastic supplies resembling polyethylene, polypropylene, or nylon. It is at the least 2 mm thick and 3 inches wide.[citation needed] Nevertheless, completely different producers provide totally different sizes and thicknesses of barricade tape. Other common sizes of barricade tape are 2, 4 or 6 inches wide and four or 10 mm thick.[citation needed]

Barricade tape usually has a shiny background and pre-printed bold warning text. It’s also potential to purchase plain barricade tape and write a customized message on it. Nevertheless, care needs to be taken when utilizing custom tape, as barricade tape designs may be required to adjust to laws, such as the Occupational Safety and Health Administration (OSHA) and American National Standards Institute (ANSI) rules (when used for purposes topic to regulation by these organizations) within the USA.

Barricade tape is used in accordance with the color specifications set by OSHA and ANSI. Barricade tape may be use primarily as a safety precaution for numerous industries and procedures.

Development tape

This is used in construction zones to inform individuals about ongoing building and that there are possible hazards within the demarcated area. Development tape often employs a yellow-black color combination and incorporates printed textual content, reminiscent of “Under Construction”, “Caution”, “Work Zone”, and “Keep Out” (among others). This type of barrier tape is commonly found on the site of renovations, demolition, and minor repairs.

Hazard tape

This is utilized in locations containing a substantial danger. Examples embody electrocution hazards or areas within which there is a risk of exposure to toxic chemicals. In some regions, the particular color mixture signifies the type of threat. For example, yellow-black tape may be used to signal the presence of a physical hazard (e.g., a hole), while magenta-yellow can denote a radiation hazard. This type of barrier tape is commonly used in laboratories, production areas, and industrial zones.

Traffic control device tape

This type of barrier tape, as its name implies is used to manage traffic, whether or not foot visitors or vehicle traffic. Traffic management gadget tapes are used as momentary traffic signal to redirect visitors throughout parade or every time a road is closed. These are normally brightly colored, either in stable orange or orange-white combination.

Police tape or law enforcement tape

This type of barrier tape is used to isolate, protect and protect a criminal offense scene. Police tape is used to inform the general public that an investigation is on going and that a explicit area is restricted. This is often seen with a yellow-white, yellow-black or blue-white colour combination.

Firefighter tape

This serves the identical purpose as police tape and hazard tape. Firefighter tape is used to isolate a specific area throughout or after a fire to maintain the general public away from fire-related risks (e.g., smoke inhalation, airborne particulate matter, and damaged constructions).

Requirements for barricade tape

OSHA and ANSI provide exact specification for barricade tape colors. These are present in OSHA laws 1910.22 and hundred forty four[citation needed] and ANSI Z535.5-2007, Safety Tags and Barricade Tapes (for Temporary Hazards). Nevertheless, the dimension, thickness, and supplies of the barricade tape are left to the discretion of the manufacturer.

OSHA-specified barricade tape colours

Red / white for Fire Prevention and Protection Equipment.

Black / white for Housekeeping and Aisle Marking

Magenta / yellow for Radiation Hazards

Green / white for Safety and First Aid

Blue / white for Defective Machinery

Orange / white for Traffic and Warning Warning

Black / yellow for Physical Hazards

ANSI-specified barricade tape colours

Yellow/Black Barricade Tape serves as CAUTION and POTENTIAL HAZARD from:

Excavation less than 1.2 meters (4 ft) in depth

Identification of journey hazards and low hanging objects

Material storage on site

Red Barrication Tape indicates DANGER and SERIOUS HAZARD from:

Overhead work

Live electrical parts

Scaffold under building

Around swing radius of equipment with a rotating superconstruction

Magenta (Purple)/Yellow Tape denotes DANGER and POSSIBLE RADIATION EXPOSURE

Underground warning tape (custom) warns about:

Digging underground gas-pipeline, electric cable and OFC cable installation

Custom thickness and width are available

Underground work

Protection from overground work

United Kingdom

Red and white tape (prime) or yellow and black tape (backside) can both be used to mark hazards under UK health and safety rules

Health and safety laws state that markings needs to be placed around obstacles or harmful locations. This consists of where any of the following current a risk:

people tripping or falling

objects falling

individuals or vehicles colliding with objects

These markings should be made up of alternating red and white or yellow and black stripes of equal measurement at a forty five degree angle. Barricade tape can be utilized to satisfy this requirement as long as the tape fits these requirements and is “commensurate with the dimensions of the obstacle or harmful location in question”.

If you loved this article so you would like to acquire more info regarding police barrier tape nicely visit our own website.


Leave a Reply

Your email address will not be published. Required fields are marked *